Results 1 to 7 of 7

Thread: Lathe chuck care

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-01-2012, 5:30 PM #1
    Dave Lehnert's Avatar
    Dave Lehnert
    Dave Lehnert is offline [OP] Member
    Join Date
    Jul 2005
    Location
    Cincinnati Ohio
    Posts
    4,734

    Lathe chuck care

    Received my PSI CSC2000C chuck in the mail today. They are not shy about coating it with oil. I got all the oil cleaned off.
    What is recommended to use on the chuck? I was thinking powered graphite on the moving parts of the chuck body. Dry lube on the jaws. Will dry lube have any effect on gripping wood? Would past wax be better?
    How about thread Anti Seize on the jaw screws.

    Don't want anything to rust in my shop but don't generally have a problem because I keep things well waxed.

    Any other care tips I may be overlooking ?
    Last edited by Dave Lehnert; 03-01-2012 at 5:32 PM.
    "Remember back in the day, when things were made by hand, and people took pride in their work?"
    - Rick Dale
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules