Hi All,

The good news...I bought and installed a Laserkerf on my Bosch 12" miter saw. I tuned it and it is really accurate. The bad news...it is so accurate that it pointed out that the kerf width on my Forrest Chopmaster blade is not 1/8" as I thought. Rather, it is 7/64 (as the Forrest web site clearly states). Not really bad news except that I will not be able to use both sides of the laser line to sight for the cut. That is one of the advertised features of the laser unit.

Second question, for the trim carpenters out there: we installed new ceramic tile on most of the ground floor of my house. I now have to reinstall the shoe molding around most of it. I will have to shoot the nails horizontally because they might otherwise hit and crack the tiles. I have both a brad nailer and a 15g finish nailer. Any suggestions as to the proper fastener to attach the shoe molding?

Thanks,
Mark Blumer (East Lansing, MI)