Howdy,
I am thinking of buying a Jet JJP-12HH. I have 12-2 wiring in the shop that is on a 20 amp circuit for my Delta Unisaw and Steel City Band Saw. The manual for the JJP calls for a 30 amp circuit breaker. My questions are 1) if I replace the 20 amp breaker with a 30 amp breaker am I endangering my other tools on that circuit? I of course only run one of them at a time. 2) Conversley, would it be ok to put the JJP on a 20 amp breaker or is the surge load greater than the 20 amps as suggested by the 30 amp rating?
Thanks,
Mike