I agreed to build my parents a 42" round pedestal style kitchen table for Christmas. The drawing we agreed on called for a pretty simple table base; essentially just an "X" (pic attached, pretty rough drawing). Project scope just increased somewhat by their request to incorporate a 22" - 24" removable leaf into it; now I'm in unfamiliar territory. I'm not necessarily done looking, but I did find this in terms of hardware: http://www.hardwaretree.com/proddetail.php?prod=D-650%2F125U . I assume I dado the top of the "X" to sit the slides flush with the top? Obviously, the table top and leaves will primarily be supported by the hardware which kind of bothers me. Any good ideas regarding hardware or methods of work would be very appreciated. Thanks.
Reply With Quote