Just finished my first shop cabinet, a sharpening station for hand tools, and thought I'd share a picture. I bought Tom Clark's book on building shop cabinets and it demystified the process for me. I used 3/4" oak ply from HD for the sides and drawer fronts; a variety of scrap 3/4" ply for unseen parts; 1/2" ply for the drawer sides and 1/4" oak ply for the drawer bottoms. The top is 2 layers of 3/4" mdf w/ a hardboard top and trimmed in Sassafras (of which I have too much). My only deviation from Tom Clark's method is I used pocket screws and glue in a few places.

IMG_0676.jpg

Thanks for looking