Hi all,

this is my first post on here so please don't scold me ,
I just recently got introduced into 3d router works,
what I do I design my mesh/objects in 3ds max and then export to vectric cut3d.

I did a couple of test jobs and they turned out great, but recently I was doing a real job and had to do it 3 times over as I was getting undesirable results...
What happened is the first rough pass seems like its cutting 0.125" off its origin.

I set up the files -2 passes the 1st rough pass to shave the majority of material with 0.25" 4 flute center cut helical bit and the 2nd precision pass I use 0.25" ball nose bit, the material thickness is 1.5" its an embossed logo etc..,
What happens is it seems like either the first pass or the second pass is offsetting by 0.125" and I don't understand why...
to control and send the jobs to router table we use tool path software.

Does this ever happen to anyone else ?
any help would be appreciated.

thanks,

Andrew