I do most of my edgebanding with a Brandt edgebander,but sometimes if I have a curved piece,or just a small amount,so I use an iron on edgeband.I must say,I have never felt good about the bond quality of these pre glued edgebands,so I am thinking maybe hot hide glue would be a good option.I was wondering if anyone here has done much edgebanding (with veneer) using hot hide glue,and if anyone has any advise to give.Also,I was thinking a stronger gram weight,like 350gr might be best,so it with tack quicker,and not require as much working?I have plenty of 192gr for flat veneering,but I wouldn't mind getting something stronger for this purpose if it would be beneficial.Any advice or tips would be appreciated.