IMG_1125.jpgIMG_1126.jpgIMG_1127.jpg
My old log holder had seen better days, so here is the 4th version. I went with sections of 2x8 for holder and 2x6 supports this time. The spacing is staggered to allow for different size sections and hopefully multiple cuts on a log/tree section. The crotch was cut earlier but shows how it will allow for splitting or cutting the pith out. Of course, there is the damage to the stand, but it holds up pretty well. The 2x2 underneath at each end of base fits the saw horses and makes the stand stable and allows using at a good working height.