Got this cherry branch burl last week and decided to put it between centers and round it off just to see what it looked like underneath. Didn't know what would be left for a box or dish/bowl etc etc. Turned out a little more solid than I though it was going to be so after getting it cleaned up, kind of looked like the beginnings of a vase anyways. Not the prettiest bottom curve-wise but couldn't bring myself to making chips out of the nice figure that was still left in that area, so here's how it turned out. Drilled starter hole and then hollowed out. 13" high x 2.75"W-top, 4.5"W-middle, 3.75"W-bottom. 1/4" to 3/8" wall thickness. After it dries I think I'll trying my hand at piercing out the bug holes. One coat of Watco so far.

cbb 2.jpg cbb 3.jpg cbb 7.jpg cbb b.jpg cbb c.jpg