Recently, I had to do some adjustments to my planer (Grizzly G0453) after I started having troubles. Wood wouldn’t feed through causing deep gouges in my work and I had excessive snipe. After making adjustments to the infeed and outfeed rollers, the bed rollers, chip breaker, roller spring tension, lubing, adding gear oil, checking belt tension and waxing the table, everything is working as it should. I started to wonder though, how often things come out of adjustment? I’m a weekend warrior for the most part and don’t use my planer nearly as much as some of you do. For those of you that have planers, how often do you have to make adjustments to your planer to keep things in good working condition?