I am rearranging the shop and trying to make room for a couple more tools. I had to move the dust collector to a corner that wasn't convent to get to when using any of the tools. I checked out some of the commercial options and decided to do my own home spun remote.

So far I am really pleased with how it turned out. I have 3 remotes that I plan on using Velcro or something to attach them to the various tools, and an extra 110 receiver that I can use if I ever get a dust filtration system, all for $53

I went to Amazon and got
2 pole 30 amp contactor https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
110 volt remote with two recievers and two remotes https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
A third remote https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
I also went to the box store and got a 4 x 4 junction box.

mounted the contactor in the box, and removed the wire from the wall to the switch in the switch box and hooked it up to the contactor,
I had a short piece of similar 3 wire cable that I ran from the other side of the contactor to the switch.
finally I took an old computer cable and cut off the power supply end, and hooked that to the coil on the switch Plug it into the remote outlet and turn on the switch. Now all I have to do is hit the on or off button from any one of the 3 remotes and the collector fires up.

I could try to draw a diagram if my description isn't clear.