Howdy folks! Its that time of year in our corner of the world again, & this year has brought some unusual requests to our shop. We've got craft shows coming up, & we're busy getting things ready for those. But, I've had several folks asking us about projects with pallet wood. What little I've worked with it, it's ALOT of work, brittle, & hard on equipment. One of my worries of putting pallet wood on the lathe, & trying to turn it, is it "exploding" so to speak due to it being brittle. I did finally get up enough nerve to run a glue up of pallet wood through my planer. Taking light cuts, after I finally got through the rough part, it cleaned up nicely. Yes, there are assorted breeds of wood in pallets, & that's another intriguing point of it. So, I guess the main question is, has anybody turned pallet wood? And second, how did it work out for you? Thanks for your time & advice.