Hello, I'm hoping somebody can provide some pictures showing the proper thickness of cermark on metal. I've spent days reading about it on here and other forums and know that since I'm using a glass tube chinese machine I have to deviate from the normal settings and do some power grids, but I would really like to see what it looks like properly applied since I think we've probably been putting it on to thick from the spray can. We've ordered an airbrush to start using that method, but reading descriptions where people talk about the consistency of milk and being able to see the metal through the coating aren't helping us. If someone could post some pictures or a video of how it should look before lasering I would greatly appreciate it.

The machine we're using has a 100 watt glass tube and the speed maxes out at 400 mm/s or 16 ips. We're mainly using this for stainless Yeti Ramblers on a rotor.

Thanks for any help you can give.