trouble squaring up incra ts-ls 32
Hi, I purchased an incra ts-ls 32 a few weeks ago. I have it mounted to the table saw, but am having some issues tweaking it and getting it square with the table. My biggest issue is it binds really bad the closer to the back it gets. I took a few pictures to hopefully show what I am talking about. I checked to make sure the rails were level. And they are both the same distance from the surface of the saw both front as back. As you slide it back away from the blade. It starts binding. The front of the fence also does not want to tighten square with the table. I can hold pressure on it and make it square,but I figured the binding was tied to this.
.image.jpg
Reply With Quote