Mudroom oak bench.jpg Hi all. Building this mudroom bench and upper shelf for my daughter's Christmas home tour. Shelf with brackets completed. Different design than the picture shows. I installed the tongue and groove pine last week-end. Their walls are L shape, so I neo-angled the corner. I've just dressed out the 1.5" red oak for the seat. I'm going to rout the bottom to allow a 1/2" ply to secure the 22 degree miter cuts. I'm going to dovetail the seat supports where they meet the wall, then attach a dovetailed piece to the wall and slide them down over. My question, is the dovetail the best approach to attach the top of the supports to the seat? Thanks, Greg