This is a Hall Table that I made for a local Charity Auction. It's probably at least 80% made using only hand tools. I cut the frame rails and top pieces to rough size on my TS, I made a template then cut our the general shape of the legs on my BS. All of the shaping, joinery, and smoothing was done by hand. OK, I did use a vac bag to apply the veneer. I finished everything with Amber Tiger Flakes Shellac, then applied 2 quick coats of Behlen Gel Finish to the top to make it more durable. It was a really fun project.

Sawn I ready to build
20170116_182846.jpg

Vac Bag
20170128_153733.jpg

My pump
20170128_155800.jpg

Fresh out of the bag
20170128_183816.jpg

General shape cut on bandsaw
20170124_151442.jpg

Turning square to round
20170131_165308.jpg

Spokeshaving
20170131_165601.jpg

Whew... One down, three to go
20170126_162113.jpg