It has been a while since I have had a shop set up. We moved about 2.5 years ago, and I broke ground Labor Day weekend 2015. With a lot of planning and building it myself, and well, some flat board projects for the kids and house along the way, the turning area with good dust collection is finally set up. I will keep this post to turning and discuss it more in the Workshop forum. Looking forward to some making some shavings again. I still have a pallet piled with wood in the shed that I have now moved three times. I don't need to move it into the shop, right? That's what a shed is for....
A quick description of the pics:
I think most of my tools have been posted somewhere along the line. Its just been a while.
The Jet is setup near most of the tools that are put on what is basically a tall knee wall (if that makes sense). It is also very close to the 6" DC piping (V-3000 DC).
The Delta has its own very heavy mobile stand. I make a lot of pens, so there are minimal tools near that lathe.
In between the lathes is my grinder with CBN wheels. The cabinet below the grinder has other sharpening gadgets and hollowing tools in it.
In the pictures you see a cabinet that I put behind me to put tools and other various things on I need nearby when working on my masterpieces!
Hopefully this will provide some ideas for others. I have gained a lot of knowledge and ideas from those who have shared on this forum.
Reply With Quote