Bought the Dewalt, partly because I saw nothing about twisted tracks like was happening sometimes with the Makita. When I set it up, the saw rocks on the track all the way down the the length. The base/shoe on the saw is flat. I've isolated it to a 3/32" cup down the length of the track. Regardless of which direction I want to cut, the saw does not sit flat on the one (same) side.

The track wont flatten out so that the saw wont rock. Unless I clamp it.

I only found one hit on this topic when I googled it, which makes me wonder if I'm doing something the wrong way.

I'm frustrated - this is a brand new tool, right out of the box. Any thoughts?

Thanks.
Fredk