Results 1 to 15 of 40

Thread: New Hammer K3 Winner won't power up....looking for help.

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 07-12-2017, 5:14 PM #1
    scott vroom's Avatar
    scott vroom
    scott vroom is offline [OP] Contributor
    Join Date
    Sep 2009
    Location
    Three Rivers, Central Oregon
    Posts
    2,340

    New Hammer K3 Winner won't power up....looking for help.

    I connected a 240V plug to the saw motor wire and plugged it into a hot recepticle....nothing happened. The blade guard is in place and locked, the emergency stop button is in the ready position. Felder provided zero electrical troubleshooting documentation. I called tech support, they were very busy and would try to call tomorrow.

    Any thoughts on what the problem might be? Maybe I've overlooked a safety switch or reset button somewhere on the saw?
    Last edited by scott vroom; 07-12-2017 at 5:22 PM.
    Scott Vroom

    I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules