Quote Originally Posted by Ben Rivel View Post
From my research I decided to go with Omer. Havent been disappointed since.
I've wanted to replace my Senco, 18ga, 1-1/4" nailer for awhile. I need an 18ga that supports longer nails. I wanted to love the Grex because of my 23ga Grex pin nailer. But everything I read said the 18ga is nowhere near the same quality of the 23ga. I can't buy their 18ga nailer because of the good ratings of the 23, even though my experience is the same; Grex makes a really good 23ga pin nailer.

I have a Omer 15ga nailer with plastic pins that I bought when I bought my CNC to nail stuff onto the CNC table without the fear of destroying a cutter for whenever I screw up. It's worked flawlessly shooting plastic nails through MDF and Plywood and releasing with a hammer whack.

My biggest complaint against Omer? They make, arguably the best nailer on the planet and surround it with the worst packaging ever. It comes in a box, not a plastic box, with the nailer shifting around enough to break the foam inserts. But, damn if it doesn't shoot nails better than everything I've ever used.