There has been a bit of conversation about CBN grinding wheels and what grit to buy and I see the term honing use quite a bit. Seems like the term honing is used to mean to sharpen after sharpening on a CBN. My question; what do you use to hone?? Another use I have seen is to hone off a burr from the grinding wheel prior to putting a burr back on with a burring tool. I have a rag buffing wheel from LeeValley and use green goop on it to hone. I also use a small diamond card to hone. Sometimes I don't hone and the tools still seem to work pretty good. Am I missing something???