So I’m finally going to pull the trigger on a new drum sander. I leaning towards a
Supermax but would consider a Jet. Question is size. So first off I have pretty much
decided on an open ended unit because I will be using it for smaller table tops so
it needs some capacity but I don’t need it for large table tops. Secondly I have
some space but a large wide belt is out of the question. Third is I can’t spend
Much over 2k.I have always been a bigger is better guy,but when I bought my
Festool track saw I went for the 75 over the 55 and find it
a little large and clunky.Last question,is the oscillating feature worth the extra money
on the jet 22-44. On the Supermax trying to pick between the 19-38 or the 25-50.
Reply With Quote