Hello all. I am re-purposing some base cabinets from one room to another and need to add a work surface/desktop. The overall dimensions are 26" x 110". The cabinets are cherry. 4' x 8' cherry plywood is common enough albeit 14" too short. I cannot find any 4' x 10', presumably it is out there, perhaps MDF veneer??

I can probably find 10' 3/4 stock and do a glue up for the panel and deal with the nature of wide panel when assembled to the base cabinets. Getting it flat would be my biggest concern. I would hate to have a splice in the panel but I guess that could work.

The center 60" will be unsupported. It can attach to the wall on the back and I will stiffen on the front appropriately underneath with metal and hide that with molding.

What are some of your thoughts on spanning that distance of 110"?

Thanks,
Jeremy