I am still surviving with a shop vac that has a dust deputy and autostart switch. But it doesn't really work well for my new SawStop nor my old 8 5/8 jointer or 10 inch planner. So I started running another 110V circuit today and may finish it tomorrow. I am pretty sure I will get the "2hp" HF and a super dust deputy, hopefully the XL (I think it will do better with fine dust due to its height but I have a 8 foot ceiling to deal with). I'm thinking I will use a 5 inch main line dropping to 4 inch at the tools. I may use metal for the 5 inch and plastic for the 4 inch just due to easy availability.

But I am also starting to think of setting it up to be able to discharge outside or through a filter. Most of the year in South Carolina, I work with the doors open so outside discharge would be fine. But there are a few months that are too cold or hot to do that. So it would be nice to be able to just filter the air those months.

Has anybody done this?