I usually turn a lot of bowls ,but my roughouts are still drying in my homemade kiln. I found some dry 3” thick maple and decided to turn some boxes. This box is about 3” tall and 2 1/2”. The interior was cleaned out using a 1/2” swept back spindle gouge. I used a series of pull cuts starting a the center and working toward the desired wall thickness. The texturing was done with the small Sorby texturing tool. The beading was turned with a 3/8” spindle gouge after the texturing was applied.
A1D75580-AC3E-46FE-A128-DDE00694C2CA.jpg BA0F2CEC-81E9-44DA-B1AB-102FC56345F0.jpg