I have a six foot long live edge slab of black cherry I'm making a coffee out of and need advise on attaching the live edge "legs"(only 12.5" tall). I have already cut the legs to finished hight because originally I was going to make a single stretcher between the legs and maybe figure eights or forged steel L brackets to secure the top. Now I'm not sure I want to do the stretcher. That leaves either loose tenons or dowel pins(3/4") and I'm pretty sure I shouldn't glue the top of the legs to the under side of the table. I like the look of it with just the top and legs with no stretcher but I'm worried about racking.I see pictures of live edge tables with live edge legs but no mention of how they are attached. My question is how do "most" people do this? Thanks in advance for any help with this project.

Bill

P.S. - The slab and both legs have been flattened.