I have a Wadkin RS6 that I may need to remove the spindle on and have no idea on how to remove the spindle pulley. The only think I can see on the pulley is an unthreaded hole. There is also a hole in the spindle that is used for the spindle lock. Is it possible that the pulley is threaded on to the spindle and is removed by inserting bars into the holes to unscrew the pulley?

I need to replace the outboard bearing as the plastic retainer for the rollers is broken allowing the rollers to bunch up. Does anyone have any information on this gearing?
As plan "B" I am thinking of machining the spindle to take a standard deep groove 6209 bearing. The bore in the headstock is 85mm.

Any help will be greatly appreciated.
Peter
IMG_20190311_103150286 (Medium) (2).jpgIMG_20190311_103146505 (Medium).jpg