I’m getting ready to start a chair project using oak. It will be finished with two coats of Target Coatings USH3000 shellac sealer and then3-4 coats of EM6000 lacquer.
Most of my chair projects are walnut, cherry, or maple and I never use stain or grain filler. With this oak chair I plan to use Crystalac WB grain filler and would like some advice on the proper finishing sequence.
1. Grain filler, shellac sealer, and EM6000 top coat.
2. Shellac sealer, grain filler, top coats.
Or perhaps
3. Shellac sealer, grain filer, more shellac sealer, topcoats.
Thanks for the help.