Building a dresser out of walnut. One of the cross pieces holding the two sides together shifted during glue up and is short of the front by about a 1/16 or so. I think I can make the drawer work with the adjustable guides and probably best to try and not mess with it, but wanted to ask.

A twofer...

Also, the top row is divided in three sections. Two smaller drawers on either side with one larger in the middle. One of these vertical dividers shifted during glue up. It is flush on the top, but sticks past the cross piece @ 1/8" on the bottom. I think I can come at this with a Japanese saw from the fat protruding end and cut the wedge off and sand it smooth all around so it appears flush.

Open to suggestions. Thanks.

Brian