Admit it-What Harbor Freight tools do you have?

[Curt Harms]

6" & 12" F clamps and spring clamps. Tarps and glue brushes, 3 Ton auto jack. T50 pneumatic stapler that will sink 1/2" staples flush in oak, way better than the electric stapler it replaced. It seems like their hydraulic stuff isn't too bad for weekend warrior use, don't know that it'd stand up to regular use. The pneumatic fittings I bought there leaked. I did buy one thing with an electric motor - I needed a buffer for a one off job and wasn't near home so I bought a Harbor Freight one. It did the job, still works but I know understand why they sell gloves that are supposed to isolate vibration. If I use it for more than a couple minutes my hands tingle.

Edit: I have 2 sets of combination wrenches, SAE & Metric. They seem to fit the heads fine, no rounding off or slipping. The edges of the handle portion are not well rounded over so they can hurt my hands a little if applying quite a bit of force. For my very limited usage that's not a problem, I have gloves if needed.