This bench which graces the spare bedroom, like all my past benches, was drawn up w/o a tool well. At the last minute, literally as I was spreading glue on the 4 board wide sections, I decided to go all Frank Klausz on it and leave space for a well. Life is change, right?

Turned out that where once I was a use-it-then-put-it-away kind of guy, I became Charley Brown's pal Pigpen. That got truly aggravating during the large construct of the audio rack. So between Sunday and now, I got the final module out of the closet, sanded and cleaned as much BLO off the edge of the existing as possible, and with dowels to help the join, glued it on.

Bondo in some large defects when I built it (dumb move) needed removal and filling with epoxy which left the sanding mess you can see and the new section has to be planed to match the old. I've got some work to do.
IMG_4974.jpg