This weekend I have come to the conclusion that I need to bring a shooting board into my shop. Problem is, I can't decide what would be a good entry-level-budget dedicated shooting plane? #5? Low angle block? I have a Sargeant 4 and 5, and a stanley 7. Neither of the sargeants are square enough on the sides to use as a shooting plane, nor worth the time to get them square. The 7 is obviously too big. Looking for something beefy, so I'm thinking a 5, but then again, beginner here, so is a low angle block easier/more forgiving? I'm usually squaring stock less than 3" wide, and most of it less than 2. Veritas Right-Hand Shooting Plane is way out of the budget for this.