I haven't visited "The Creek" in a very long time. This group was so extremely helpful when I purchased my laser several years ago. I need your help again trying to work thru the selection for a CNC machine. Some of the machine descriptions give information, but it's hard to derive if they will do what I need from an CNC machine.

I want to cut 1/16" (.063) aluminum sheet into small tags for sublimation out of sublimation coated aluminum sheet. The pieces will range from 1" x 3" to 2-1/2" x 4". I would like a bed with a minimum capacity of 12" x 12". I would like to use a small diameter cutter (.125" or so) to reduce scrap and be able to cut the .063" material in one pass, if possible. I want a machine that will work with a Windows 10/11 PC via USB connection. Provided software or compatibility with some standard like CorelDraw is a must.

This forum helped me choose and operate my Trotec Speedy 100 years ago (still going strong today) and I appreciate your help on this project.