Hi all,

Three questions here:

1. Can I chuck up the 3” Beall bowl buffs in my drill press and use them that way?

2. If not, what hardware do I need to mount the bowl buffs on my lathe? It is not clear to me from reading the descriptions. It sounds like I need the quick release adapter, the 2MT mandrel, and a threaded rod of some type? But not sure how I would attach the bowl buffs that have the concave shape to the rod given that they have a short threaded rod sticking out the back of them (which is why it seems like I could just chuck them up in the drill press).

3. Alternatively the Beall written material talks about mounting to a motor shaft. What motor would I buy and where to get it?

Thanks,

-dan