Mostly a hand tool woodworker but have 14 inch Rikon bandsaw, Dewalt 735 planer, added a Ridgid 6" jointer from Home Depot recently. The Oneida mini-gorilla has worked for me. There have been some minor issues, check the thread on that, but all in all I am happy with it. Make sure your filtration on your HEPA is the best you can get. I do not recommend blowing chips from the Dewalt 735 into a trash can or a filtration bag from Rockler. My shop was filled with fine dust and I coughed for a year before I figured out the benefits of HEPA.