Does anyone have experience with planer head in a wide belt sander?

I have sold my SCM Sandya 5 wide belt sander, will be replacing it with something modern, only looking at SCM SD30 or SD60 - I am very happy with SCM service here in NZ. Sandya 5 has been replaced with SD60, with SD60 you can replace one of the head with HPL planer head.

Just wondering how effective it is with planer head in a WBS? I know there are limitation such as you can't take off more than 3mm or 1/8 inch, and will need very good extraction (I have updated my extractor from 4kw baghouse to 7.5kw baghouse)

Again, typical SCM, there isnt a lot of info online about this feature.
scm_hpl_2017.jpg


scm_hpl_2004.jpg