I am returning to woodworking after a 25 year absence. The main area of my shop will be 16x30 with a 10x15 L. I would like to so furniture and do turning. Furniture will be primarily out of hardwood; less sheet goods.

My inclination had been to purchase a MM 16 or 20, PM66, PM 12" Jointer and 20" Planer etc. I looked at a MM combo machine which just appeared to be huge for a 16' wide shop. But what do I know. Then I started to look at a MM saw only and a MM PJ 12 or 14" or a Felder 12" or 16 PJ.

I would be grateful for your thoughts on what to buy.