OK Ill admit it I didn't research this before buying the LR32 plate and holey track. I didnt buy the full kit so I dont have the spacers or edge guides. I have TSO parallel guides I can implement. I started setting up for this last night, I aligned my plate to the router and started trying to figure out how to run. My panels were sized to fit my space and not layed out on the lr32 system. At this point is my only method to measure out each row and align the track perfectly with the panels?

Im assuming I can use a dowel to reference the bottom through the track and make a jig to align track to a mark on the panel(or measure it out). This is not going to be a time saver. I only have 5 wall cabinets though.

Next question: I bought the Rockler shelf pins with gromets. the gromets call for 9/32 holes. These holes seem very sloppy/ 1/4" holes need to be banged in. Does anyone have experience with these?