Still a CNC/CAD newbie. I'm using Carveco Maker (first year free with 1F Elite purchase) to set up a job to carve multiples of a childrens toy. Since nesting is reserved for Maker+ , I turned on the rulers feature, started creating guidelines at 2 1/4" spacing on the X axis, with the intent to snap to the guidelines. When the spacing didn't work out as expected for the board, I was a bit puzzled. Finally realized that the inches rulers are marked in 1/10" increments, or as I've come to learn, in "decimal inches". I was expecting a traditional imperial scale (1/2, 1/4, 1/8, etc). There seems to be no option to change the scale. I find this annoying, but I guess I can adjust. Since I've found a few other annoying things about Carveco, I've been starting to compare features between CAD packages.

So, here's the question: Does VCarve provide a traditional imperial scale on the inch scale ruler or decimal inches? Maybe decimal inches are more industry standard?

Thanks!