Hi all, I am starting design on a miter saw station. Because I have an older Bosch 10" SCMS, the cabinets will need to be some distance from the wall to allow for the sliding mechanism depth. Therefore, the cabinets will need to be a set distance (currently 11") from the wall. I intend to build a base out of dimensioned 2x4 and use leveling feet, then place the cabinets on top of that base. My question is how would you secure the cabinets to the concrete floor to prevent movement? I am thinking L-Brackets with concrete screws but was wondering if there is a better solution. Also, would you recommend putting bottoms on the cabinets or just spacers? They will only have drawers. Also, the space behind the cabinets will be utilized for running a 6" dust collection piping for the miter saw.
SMC3.jpgSMC4.jpgSMC5.jpg