My basement shop is just 250 square feet. That means getting by without any kind of chop saw, jointer or outfeed table. Also it means few big projects. So given those limitations I get by just fine. Nothing is mobile which is the most efficient way to work. Note; anything can be done with hand tools, power tools just go faster.

Primary bench 27 x 67 with end vise, in the center of the shop, with space all around
17" band saw
Small bench 42" high (project pieces rest here)
Offcut rack
Lathe
Bench grinder 6"
Drill press, floor model
Metal shelves
Wood storage (there is a little more in the garage)
Tool cabinet
Side bench 25 x 66
Table saw, slid to the right till it is against the wall
Belt/disk sander
Dust collector in the basement outside the shop.

NW.jpg NE.jpg SE.jpg SW.jpg