I'm hoping someone on here is good with compressor motors. I have a large CH 7.5 HP compressor. I was changing the oil today and had a brain fart. I started to refill the oil through the breather. Probably 2 or 3 tablespoons of oil got in this way before I stopped and added in the correct fill. Now I'm concerned I may have an issue due to this. The power is still off so it hasn't been run at all since I did this. What do I need to do now? I have an automatic low oil guard with window for oil level. This is not coming up so that's what got me to thinking I may have caused a larger issue. Ideas? Thanks, Neil