Max weight on bandsaw table: ACM BS540

[Tom Trees]

Presuming one would have/get a welder if this work is envisioned, so stability of the machine could be sorted out.
Here's a thread which may be of interest with better picture than what I can screenshot from utoob.
Screenshot-2024-4-16 sawing video.jpg
https://www.youtube.com/watch?v=2FZtIg5HeR0
https://www.woodworkingtalk.com/thre...-sawmill.9589/

I'm sure something more conservative on space, like those foldable ones could be braced securely for the job with a few more struts added, or whatnot,
or even those lifting tables could be utilized since one would probably need something to get logs up there in the first place?
Plenty of ways to brace the table if concerned, I haven't seen any reasonably movable bandsaw made for such use, perhaps the Makita/Hitachi saws might likely be stouter for the task, but nothing else jumps out as being much stronger, though there might likely be some folks here from the OWWM owners club who could speak of the wonders of double trunnions, or indeed some other company?

Not seeing why any of this would making the difference here though, should be small beans in the scheme of things.

Tom