Hi, everyone. I want to install some piping for compressed air in the workshop. I have a fairly typical weekend warrior shop in the basement. No one else ever uses the shop. The line will have three drops, one of the drops for spraying. I've read a lot over the years about the need to use black pipe or copper tubing. But a recent woodworking magazine featured a piece on using some sort of flexible rubber or plastic hose. And I've seen photos of shops with PVC for the air. I'm leaning towards PVC due to ease of installation and removal, if we ever move. I can't do black pipe...no experience and no tools. I'd rather not do copper if I don't have to. Any experiences or thoughts from folks who are using or have used PVC? As always, thanks for your advice and guidance.

Greg