Hi All

I'm building some cabinets for a client to hang on a wall.
It's not a big job, just 2 = 32" x 40" by 18" deep made out of black melamine.They will have mahogany doors attached with euro hinges.

I cut the melamine to rough sizes with an 80 tooth melamine blade to get a feel for it. I noticed there is a little tear out on the bottom side of the cut, since it's black it really shows. I will be edge banding with a combination of black melamine tape or mahogany but any tear out will show.

What tips do any of you have for building these basic cabinets using this material? Also what suggestions do you have for hanging them? They are made of 3/4 thick double sided melamine.

Thanks!

Oh yea happy Fday to you all !