I'm about 3/4 of the way finished with the Morris Chair I'm building for my wife. This is the first real piece of furniture I've ever built. I have to say, if I had understood what is involved I would have picked something easier to start with. This chair follows Stickley's original pretty closely. The arms and back slats are steam bent. I think if I did it over again I would build the legs up solid instead of 4 pieces with qs grain facing out. Solid would have made it easier to cut the mortises and build the little through-tenon for the arms. I've learned tons building this so far. I never do anything by halves, I guess.

Here are a couple of pics of progress: