My table legs, that is But now that I have your attention...

Okay... I'm in a bit of a pickle now. I have my legs all glued up and ready to assemble, and the apron is glued up as a frame, and I have to admit, everything looks pretty darn good. Corners square, used the chisel this morning to make things dry fit athe way they should. However...

I had planned on attaching the aprons to the legs via biscuits. But now that I have the legs all glued up, and the aprons all glued together, the biscuit jointer won't fit to correctly join them together. Yeah, talk about learning a lesson as you go! I've heard pocketholes mentioned, and I think that might work, but I don't know. And btw, I already cut the biscuit slots on the aprons before I realized that I wouldn't be able to cut them on the legs.

Here's a sketch and an earlier pic to show you what I have. The legs are 3" square. The aprons are 3".

http://www.sawmillcreek.org/attachme...4&d=1204509531

http://www.sawmillcreek.org/attachme...8&d=1204687822

Suggestions, please?

-Amy