I had been wanting to upgrade my jointer from the 6" machine I currently have. Was thinking about on the 12" combo units. But, I ran across this at a really good deal. I brought this home on Friday. It is an older 12" jointer. Quite a step up from the 6" jointer I had previously.

First picture is of the jointer loaded on the trailer after the trip home.

IMG_1419.jpg

After getting it off the trailer prior to getting it into the shop.

IMG_1422.jpg

Waiting to be connected up to power.

IMG_1429.jpg

After trying it out.

IMG_1430.jpg

View from the back.

IMG_1436.jpg

I need to do a jointer tuneup and it needs to have the blades sharpened. At some point, I will re-paint it and do a restore.