I have an LT-18, about 1-year old.

I was using it today to cut some very small stock - nothing heavy. It was working fine. Then when I went to turn it on again, it wouldn't start up.

I opened it up, cleaned everything out, including taking the guides out, cleaning, and putting them back in. None of the safty switches seems to be ingaged because I have tension on the switch when I move it to the start position. I lose that tension if any of the 3 safety switches is engaged (door, off button, foot brake). I also checked the breaker. I turned the breaker off and the on/off switch loses it's tension. Flip the breaker back to the power position and the on/off switch has tension on it again. It just won't start.

The wheels turn freely, the V-belt is clear - no obstacles or jams.

Any suggestions what to do next?

John