I work for one of the Airlines and have been ask to make some picture Frames with the Company logo on them. They are 5.5 inches wide at the base and 6.5 tall and the shape of an Aircraft tail. Total laser time for cutout and Logo is down to 2 min 45 Sec. 1/8 Birch Plywood is doubled for the top and connected to the base with Glue and Box joints to make it look like a piano hinge. Very Simple and The Cutout will act as a Templet for cutting the picture to fit the hole. Thanks Buzz. What would some of you charge for them. This is the prototype that I will be showing them.
Thanks
Stanley